• The current DAP must have an empty Info field.
If both requirements are met, the current DAP
has an Info field assigned in the form
{current floor number}{string}{number + 1}, for example, 0R06. The following figure
shows the RPN data and the Info field data in the Edit box pane, titled Current
DAP.
16. Continue placing the DAPs until the DAP list is empty.
17.
To manually add a DAP, right-click a point on the Map, and select Add DAP from
the menu. The Add DAP dialog box appears.
Create a location file
SIP DECT Fundamentals October 2012 197
To Next Page
Loading...
