Figure 50: Example of a site coverage floor plan
Obtaining site plans
Obtain two site plans or maps with dimensions marked.
Use one working copy to identify critical points, cell centers, and cell boundaries. Use
one clean copy to attach to the site provisioning record for the installer
, customer, or
maintenance.
Gather building information
Gather the following information and enter it into the work order
.
Gathering building information
1. Obtain and record building identification.
2. Obtain and record information about construction materials, such as walls, floors,
and ceilings.
3. Record the type facilities, such as office, hotel, factory, store.
4. Record the number of floors in the building.
If the building contains atriums, multiple floors, or floors not all the same shape or
unusual conditions, see
Deploying on multiple floors on page 58
.
5. Record the height of floors.
6. Record as much information as you can obtain about the partitioning of floors.
Site planning example: Able-Studio
SIP DECT Fundamentals October 2012 201
To Next Page
Loading...
Need help?
General
