The Components window appears.
5.
Select the Dynamic Host Configuration Protocol (DHCP) check box.
6. Click OK.
7. Click Next.
8. Insert the Windows CD-ROM as prompted.
9. Finish the procedure using the instructions in the dialog box.
10. Close the Add/Remove Programs window and close the Control panel window.
Configuring the Settings for SIP DECT
1. Start the DHCP manager:Start > Programs > Administrative Tools > DHCP.
The DHCP Administration Tools window appears.
Software requirements
78 SIP DECT Fundamentals October 2012
Comments? infodev@avaya.com
To Next Page
Loading...
