Avaya one-X - Setting Phone Screen Behavior; Phone Screen on Calling and Ringing

Chapter 5: Configuring the general settings
manually
Configuring telephony settings
Procedure
Click Telephony in the left pane of the General Settings window.
The system displays the settings in the right pane of the General Settings window. This
pane displays different fields depending on whether you select H.323 or SIP protocol
after installation.
Configuring for H.323 protocol
Procedure
1. Select H.323 as the telephony protocol.
2. Enter the Extension and the Password.
3. To specify the IP address of your server, click Add below the Server List field.
4. In the Add Server dialog box, enter the IP address of the proxy server.
5. Click OK.
6. Repeat Steps 3 to 5 for each server address you want to specify.
7. If you want to use video, ensure that the Enable Video Calls check box is
selected.
Implementing Avaya one-X
®
Communicator December 2012 17