Avaya one-X - Answering Incoming Calls; Answering and Ignoring Calls

on audio settings, see Using Avaya one-X
®
Communicator on the Avaya Support
Web site http://www.avaya.com/support.
Audio screen field descriptions
Field Name Description
Microphone Microphone to be used for a call.
Speaker Speaker to be used for ringing and calls.
Ring on incoming calls Check box for selecting if ringing for
incoming calls must be enabled.
Ring additional device Additional audio device for ringing.
Mute ringing for incoming calls Check box for selecting if ringing for
incoming calls must be muted.
Configuring video settings
Procedure
1. Click Video in the left pane of the General Settings window.
2. Select the Send your video image automatically when you answer or join a
video call check box, if required.
3. To enable Picture in Picture (PIP) and configure the PIP settings, select the Display
a picture-in-picture window check box and select one of the following options:
• Select Small picture-in-picture window check box.
• Select Medium picture-in-picture window check box.
• Select Large picture-in-picture window check box.
4. To keep the PIP window fixed at a location, select the Fixed picture-in-picture
window check box.
5. Select the Stretch video to fit screen check box, if required.
6. Select the Display warning before entering Full Screen mode check box, if
required.
7. Select the Automatically disable screen saver and monitor power saving mode
during a call check box, if required.
Configuring video settings
Implementing Avaya one-X
®
Communicator December 2012 31