Avaya one-X - Advanced Calling Methods; Edit Dialing and Calling from Contacts

Field Name Description
the Name Look-Up feature. Public Directory
must be configured using the Public
Directory settings.
Note:
You must select Public Directory if you
want to add Contacts.
Avaya SIP Personal Profile Manager
(PPM) Contacts
Avaya one-X
®
Communicator searches for
contacts in the PPM Contacts directory when
you use the Name Look-Up feature.
Avaya one-X
®
Client Enablement
Contacts
Avaya one-X
®
Communicator searches for
contacts in the Avaya one-X
®
Client
Enablement Contacts directory when you
use the Name Look-Up feature.
Enable wipe-to-dial (clipboard dialing) Application enables the Wipe-to-dial
feature.
Configuring network settings
About this task
You need to change the default settings on this screen only if you experience problems logging
in to the server in a VPN and/or firewall environment.
Procedure
1.
If you installed Avaya one-X
®
Communicator in H.323 mode, select the Specify
local UDP/TCP port range preference check box to configure Avaya one-X
®
Communicator for use with a firewall using UDP port restrictions.
2. If you selected the check box in Step 1, complete the Low and High fields.
3. Select the Use Differentiated Services for Audio check box and enter a DSCP
value.
4. Select the Use 802.1p prioritization for Audio check box and enter a Priority
value.
5. Click OK.
Configuring network settings
Implementing Avaya one-X
®
Communicator December 2012 37