Configuring for SIP protocol
Procedure
1. Select SIP as the telephony protocol.
2. Enter the Extension and the Password.
3. To specify the IP address of your server, click Add below the Server List field.
4. In the Add Server dialog box:
a. Enter the IP address of the proxy server.
b. Select a Transport Type.
Note:
Telephony in the Deskphone mode, and IM and Presence are not available
with Transport Control Protocol (TCP).
c. Enter a port number for the selected Transport Type.
5. (Optional) Enter the Port.
6. Click OK.
7. Repeat Steps 3 to 5 for each server address you want to specify.
8. In the Domain field, enter the domain name.
9. In the Failback Policy field, select Auto or Admin.
10. Select a Registration Policy from the drop-down menu.
Note:
The Mode, Avaya Environment field is read only.
11. If you want to use video, ensure that the Enable Video Calls check box is
selected.
Telephony screen field descriptions
Field Name (for H.323 protocol)
Description
Extension Extension number of your phone
Password Password for your phone.
Server List The IP address of the Communication
Manager server.
Configuring the general settings manually
18 Implementing Avaya one-X
®
Communicator December 2012
Comments? infodev@avaya.com
To Next Page
Loading...
