Avaya one-X - Completing Call Transfers

Field Name Description
Stretch video to fit screen Check box to indicate if the video is to be
stretched to fit the screen on a full screen
video mode.
Display warning before entering Full
Screen mode
Check box to indicate if a warning must be
displayed when you click the icon on the
video window to display the video in the full
screen mode.
Automatically disable screen saver and
monitor power saving mode during a call
Check box to specify if the following be
disabled:
• screen saver to become active during an
active video call.
• the monitor to switch to the power saving
mode during an active video call.
Preferred Camera The field to select a preferred camera using
a drop-down menu.
User Session Maximum Bit Rate The field to select the maximum bit rate using
a drop-down menu.
Show the video window automatically on
login with video capabilities
A check box to indicate your preference for
displaying the video window at login.
Codec Preferences Check boxes to select video codecs.
Configuring public directory settings
Before you begin
Before you can access a public directory, you need to select the Public Directory check box
in the Preferences window. For the procedure, see Configuring preferences settings on
page 35.
Procedure
1.
To configure Avaya one-X
®
Communicator to gain access to a public directory, click
Public Directory in the left pane of the General Settings window.
If you have logged in to Avaya one-X
®
Communicator in the standalone mode with
H.323 protocol, you must configure the LDAP server and select Public Directory for
Name Look-Up to use the Presence feature. For more information on configuring
Public Directory settings, see Configuring preferences settings on page 35.
2. In the right pane of the General Settings window, in the Directory Type drop-down
menu, select one of the following types of directories:
Configuring public directory settings
Implementing Avaya one-X
®
Communicator December 2012 33