8. Click the Advanced tab and configure the following:
a. Select a camera from the Preferred Camera drop-down menu.
b. Select a preferred bit rate from the User Session Maximum Bit Rate drop-
down menu.
For video conference in SIP mode using Avaya Aura
®
Conferencing, you must
set the User Session Maximum bit rate to at least 384 kbps.
c. Select the Show the video window automatically on login with video
capabilities check box, if required.
9. Click the Administration tab and select the Codecs.
10. Click OK.
Note:
Video feature is not supported when you are using Avaya one-X
®
Communicator
through a remote desktop connection or a virtual computer. For more information
on video settings, see Using Avaya one-X
®
Communicator on the Avaya Support
Web site
http://www.avaya.com/support.
Video screen field descriptions
Field Name
Description
Open Video Window Opens the video window if it is not opened.
Send your video image automatically
when you answer or join a video call
Check box to indicate your video image is
automatically sent when you answer or join
a video call.
PIP Settings Picture in Picture settings. The options are:
• Display a picture-in-picture window:
Displays the near-end video and the far-
end video in the same window.
• Small picture-in-picture window:
Provides a small picture-in-picture window
• Medium picture-in-picture window:
Provides a medium size picture-in-picture
window.
• Large picture-in-picture window:
Provides a large picture-in-picture window
• Fixed picture-in-picture window
location: Provides the picture-in-picture
window at a fixed location
Configuring the general settings manually
32 Implementing Avaya one-X
®
Communicator December 2012
Comments? infodev@avaya.com
To Next Page
Loading...
