Avenir 4/8CH DVR - Remote PC Access Methods

To Next Page

To Previous Page

102

B. How to access DVR from Remote PC?

LAN Connection – Using a switching hub

Connect to the system, using a hub (Switching hub) and an Ethernet cable (10BASE-T/100BASE-TX CAT 5

LAN cable)

1. Run the pre-install the network client software on the supplied CD. (Refer to Chapter 6. Network

access using the Exclusive network viewer)

2. Check the IP address from SETUP>SYSTEM>DESCRIPTION of DVR.

3. Run network client software and click button.

4. Input Site Name, Site Address(IP address), Port No., and Password on the connect window. And

click OK. Then, press

button after checking the left check box.

You can learn how to port forward many kinds of Routers from the bellow site.

http://www.portforward.com/english/routers/port_forwarding/routerindex.htm