Single audio display. To set audio single for highlighted channel only,
press the Audio button on the front panel.
Indicates that alarm is set. To set the alarm function, press the Alarm
button on the front panel.
Indicates that alarm output is activated.
Event indicator. When there is an event (motion recording, video loss,
HDD fail, S.M.A.R.T), this icon will be highlighted bright.
Indicates that a network client is connected to the DVR.
Indicates that sequencing mode is enabled.
4-2. SEARCH Screen
To enter the search screen, select SEARCH menu on the screen using the mouse or press SEARCH icon
on live screen.
Figure 4.2.1. Search Screen
There are 7 ways of search menu such as TIMELINE, EVENT, GO TO FIRST TIME, GO TO LAST TIME,
GO TO SPECIFIC TIME, ARCHIVE and LOG on the screen.
To Next Page
Loading...