Avery Dennison 64-Series - Winding Diagrams

03/13 Rev. 5.08-01 USER MANUAL Einrichten
64-xx – 64-xx dispenser
2
Winding diagrams
The winding diagrams show the winding direction of material and ribbon
through the 64-xx or through the 64-xx dispenser printer. You must follow
this basic schema when inserting/changing material and ribbon.
 Ribbon and material should only be inserted/changed by specially trained
personnel.
64-xx
[1] This is how to insert material and ribbon correctly in the 64-xx or Chess x.
Designation of parts
No. Designation No. Designation
1 Adjusting knob for print head
contact pressure
8 Feed roller
2 Ribbon roller 9 Adjusting knob for punch
sensor
3 Ribbon rewind mandrel 10 Pad rollers
4 Ribbon unwind mandrel 11 Ribbon deflector
5 Material unwinder 12 Opener
6 Print head 13 Material guide
7 Print roller 14 Dancer arm
[Tab. 1] Designation of parts on the 64-xx.
1
2
3
4
5
6
8
9
10
11
12
13
7
14
Z0124.cdr