Avery Dennison 64-Series - Data Transmission with Ethernet; System Requirements

11/14 Rev. 03 USER MANUAL Advanced Applications
AP 4.4 – AP 5.4 – AP 5.6 – AP 7.t – 64-xx – DPM – PEM – ALX 92x
17
Data Transmission with Ethernet
System Requirements
Hardware • Printer
• Ethernet cable: must have quality „Cat. 5E“ and be shielded.
Software • Firmware:
• Network protocol: TCP/IP
CAUTION! - Unqualified manipulations of a data network can disturb or stop its pro-
per functioning.
Connecting a device to a network requires network administrator knowledge.
 Consult your network administrator for assistance, if you don´t have knowledge on
this level!
Printer Feature Ethernet connection by
AP 4.4 – Ethernet connection not possible!
AP 5.4 –
Integrated Ethernet interfaceAP 5.6 –
AP 7.t –
64-xx
Gen. 2
CPU board A2292 with integrated Ethernet inter-
face (optional)
DPM
PEM
ALX 92x
64-xx
Gen. 3 Integrated Ethernet interface
DPM
PEM
ALX 92x
ALX 73x – Integrated Ethernet interface
[Tab. 16] Equipment of the different printer types witih Ethernet interfaces.
Printer Feature Firmware version
64-xx, DPM, PEM, ALX 92x Gen. 2 3.0
64-xx, DPM, PEM, ALX 92x Gen. 3 5.02
ALX 73x -- 6.36
a
a) Printer firmware
AP 5.4, AP 5.6, AP 7.t -- alle Versionen
[Tab. 17] Minimum firmware requirement if it is to apply the Ethernet function.