11/14 Rev. 03 USER MANUAL Advanced Applications
AP 4.4 – AP 5.4 – AP 5.6 – AP 7.t – 64-xx – DPM – PEM – ALX 92x
14
Insert Input Field in Printjob
Input fields can be defined in the following Easy Plug field types:
• Text field
• Counting field
• Barcode field
These field types can be defined through the following Easy Plug commands: YT, YN,
YB, IDM, PDF, MXC, CBF, YC, YS, YG.
Using a special syntax it is made clear in these commands that the text dealt with here
is not a fixed text, but text requested at the time of implementation.
Further information on the input field syntax can be found in the description of the re-
spective command in the Easy Plug Manual, topic section Description of commands
.
Example Application
1. Generate two text files with the content shown in the tables below.
Tip: Cut out the content using the Acrobat Reader text selection tool and copy
it to a text file.
2. Create a directory on the memory card called \FORMATS.
3. Store the two text files as TEST1.FOR and AVERY.FOR on the memory card in the
directory \FORMATS.
The file ending must be *.FOR!
There is no difference made between uppercase and lowercase letters!
4. Switch off printer.
5. Insert memory card into the printer’s card slot.
6. Turn on printer and switch to online mode.
Example
#!A1#IMN100/60#ER
#J40#T5#YT107/0///Simple test for
#J30#T5#YN100/0/60///STANDALONE Mode
#Q3/
[Tab. 14] File „TEST1.FOR“
Example
#J10#T5#YT107/0///Fixtext#G
#J40#T5#YN100/0/60///$<Color:>,Lightred
#J40#T5#YN100/0/60///$<Color:>,Lightred
#J20#T5#YT107/0///$<Article number:>,
#!A1#IMN100/60#ER
#Q3/
[Tab. 15] File „AVERY.FOR“
To Next Page
Loading...
