Avery Dennison 64-Series - Automatic setup loading

11/14 Rev. 03 USER MANUAL Advanced Applications
AP 4.4 – AP 5.4 – AP 5.6 – AP 7.t – 64-xx – DPM – PEM – ALX 92x
34
Loading settings from memory card
All files with parameter settings, which are stored in the \FORMATS directory, can be
read out using the standalone mode.
 The file extension must be „.FOR“, see Selecting files from memory card  on
page 10.
Automatic setup loading
 Save the setup file as \AUTOSTRT.FOR (in the root directory on memory card).
Loading the settings:
1. Switch the printer off.
2. Insert the memory card.
3. Switch the printer on. The setup loading starts automatically. Display text when the
settings are loaded:
Switch off.
Remove card