11/14 Rev. 03 USER MANUAL Advanced Applications
AP 4.4 – AP 5.4 – AP 5.6 – AP 7.t – 64-xx – DPM – PEM – ALX 92x
12
mation about the job is displayed in the "Print control" console. While the print job is
processed, it is started newly in the „Standalone“ console. The input fields are polled
again, with the previous entries as default. Alternating with the first input field, the text
„Start next job“ is diplayed.
Each printjob file may contain only one printjob. If any printjob file contains more
than one printjobs, only the first printjob is executed.
The new start of the print job can be avoided by setting the parameter SYSTEM PA-
RAMETER > Single job mode to „deactivated“.
Press the Esc button to go back to the file selection.
It's also possible to enter a single „* “ for the print quantity. This makes the print
quantity „endless“.
Operation Printer button Keyboard key
Increase by 1 Feed Cursor Up
Decrease by 1
(the predecessor of 0 is 9)
Cut (or Apply) Cursor Down
Enter Online Enter
Delete/Cancel Esc Esc
[Tab. 11] Keys for entering variable data
To Next Page
Loading...
