12/14 Rev. 03 USER MANUAL Commissioning & Operation
64-xx
6
H Optional: Signal interface USI
• 4 inputs / 8 outputs
• Standard at „64-xx Dispenser A“
I Optional: Mini-DIN connector
To connect a remote operator panel
J Optional: start/stop signal input
• Standard at 64-xx Dispenser
• To connect a foot switch (signal starts printer) or a stacker (signal stops
printer)
K Centronics interface
For parallel transfer of print data (cable is inclusive)
L Power switch
Turns the printer on/off
M Mains power supply connector
Connection to a mains socket using the provided power cable
N Connector for peripheral devices
Admissible peripheral devices are:
• Cutter („Cutter 2000“)
• Rewinder („Rewinder 2000“)
• Applicator LTSI (with „64-xx Dispenser A“ only)
• Photoelectric switch at the dispensing edge (with „64-xx Dispenser M“ only)
[8] Connector (N) for peripheral devices.
To Next Page
Loading...
