Avery Weigh-Tronix E1010 Manual

18 Model E1010 Indicator User Instructions
7.2 Supervisor Menu
The Supervisor menu is shown in Figure 7.2. Use this menu to set time and date, print
and clear reports, perform diagnostic tests and view audit counters.
Figure 7.2 Supervisor Menu
WARNING: Entering this menu and changing settings may affect operation of
the indicator and may require a service call to correct. Be sure you want to
change settings before doing so.
Display
test
Displays
mV/V
Date
Type0
MM HH
DD MM
YY SS
Normal Operation Mode
Press and hold for 3-5 secondsESC
Key in 1793 and press ENTER
Hour
Type0
Setup
PLU
Acc.
Type
Auto
Limit
Man
Spl
Batch
Clear
Sure?
Clear
Sure?
Clear
Sure?
Clear
Sure?
Print
Target Count
Print
Print
Print
Top
Type
App
PASS_
Test
About DispAdc
Software
version
and revision
Audit
CFG OFF
Button
test
Button
CAL 1/2 HR 2 HR 4 HR
Sleep
Serial Input Output
Pass/Fail
Tare Clear
Clear
Print
Print
Prints
report
Prints
report
Prints
report
Prints
report
Prints
report
Prints
report
Sure?
Sure?
TARE
ZERO
PRINT
UNITS
SELECT
Logs
Cal
123
Out 1 Out 2 Out 3
On Off
Port1 Port2
Pass/Fail
Preset Tare
entry
PLU0
PLU9
Used w/battery option
Available on
AWT30-500047
V. 1.0.0

Avery Weigh-Tronix E1010 Specifications

General

Brand	Avery Weigh-Tronix
Model	E1010
Category	Measuring Instruments
Language	English