Model E1010 Indicator User Instructions 9
1.9 Declaration of Conformity
Declaration of Conformity
Manufacturer Avery Weigh-Tronix
Type E1005, E1010
No. of EC type approval
certificate
UK 2723
corresponds to the requirements of the following EC directives:
Non–Automatic Weighing
Instruments Directive
90/384/EEC
1
EMC Directive 89/336/EEC
Low Voltage Directive 73/23/EEC
The applicable harmonised
standards are:
EN 45501, EN 61000-4,
EN 55022, EN 60950
Note
1
: This declaration is only valid if the non–automatic weighing
instrument was verified by the manufacturer or with a
certificate of conformity issued by a notified body.
A copy of the original signed declaration for this instrument is available
from:
Avery Weigh-Tronix, Foundry Lane, Smethwick, West Midlands B66 2LP England