20 Model E1010 Indicator User Instructions
7.2.2 HOUR submenu (Set time)
1. Enter the Supervisor menu…
DATE is displayed.
2. Press the UNITS key…
HOUR is displayed. Use this item to set the time.
3. Press the PRINT key…
TYPE1 is displayed.
Type 1 is 24 hr. military format
Type 2 is 12 hour, AM/PM format
4. Use the TARE and/or UNITS key to scroll to the number for the style you want
to use in all time stamped reports and press the ENTER key…
HH XX is displayed. This stands for hour and its current value. See note
below.
5. Key in the hour in military time and press the ENTER key…
nn XX is displayed. nn stands for minute and XX represents the current
value.
6. Key in the minutes and press the ENTER key…
SS XX is displayed. SS stands for seconds and XX represents the
current value.
7. Key in the seconds and press the ENTER key …
HOUR is displayed.
7.2.3 SETUP submenu (Setup menu)
1. Enter the Supervisor menu…
DATE is displayed.
2. Repeatedly press the UNITS key until…
UNITS is displayed. Use this item to set the time.
3. From previous step 6, press the UNITS key…
SETUP is displayed. Use this submenu to print and/or clear application
reports and choose the operation modes or values for applications which
have choices. Each is explained in the following steps. Reference
Supervisor Menu on page 18
Time must be entered in 24 hour (military) time.
To Next Page
Loading...
Need help?
General
