Avery Weigh-Tronix E1010 Manual

Model E1010 Indicator User Instructions 21
APP (Applications)
1. Press the PRINT key…
APP is displayed. Each application is listed below this menu item.
Applications are enabled and disabled in a password protected menu
but you do each application’s configuration under this menu item.
Contact your local supplier or Avery Weigh-Tronix distributor for
assistance with the password protected menu.
PLU (Product Look Up)
1. Press the PRINT key…
PLU is displayed. This stands for Product Look Up. There are 10 PLU
memory channels, numbered 0-9. Each channel contains all the
parameter values and accumulator totals associated with all the different
applications.
This menu item lets you print out the information shown in the note
below, set a tare for each of the PLU channels and/or clear the
information.
2. Press the PRINT key…
PRINT is displayed. Use this item to print out a complete report of all
application parameters and totals.
3. Press the ENTER key to print the report…
Display shows BUSY briefly then returns to PRINT. The report will be
printed to your connected external device.
4. Press the UNITS key…
TARE is displayed. This item enables or disables the use of preset tares.
Printed PLU Information
Channel #
ID#
Tare
Gross Accum.
Net Accum.
Total
TARGET OP1
TARGET OP2
TARGET OP3
Lower Limit
Upper Limit
Count Accum.
Piece Weight
Peak Weight
With PLU tares enabled, you cannot enter keyboard or pushbutton tares. PLU tares
and the other tares are mutually exclusive per NTEP rules.

Avery Weigh-Tronix E1010 Specifications

General

Brand	Avery Weigh-Tronix
Model	E1010
Category	Measuring Instruments
Language	English