12
Model E1010 Indicator Service Manual
16. Press the UNITS key. . .
AUDIT is displayed.
17. Press the PRINT key. . .
CFG is displayed. This stands for the configuration audit counter.
Press the PRINT key to see the number of times the configuration
has been altered on this indicator. This number is displayed
temporarily and then CFG is displayed.
18. Press the SELECT key to return to the AUDIT menu item. Press the
UNITS key. . .
CAL is displayed. This stands for the calibration audit counter.
Press the PRINT key to see the number of times the indicator has
been calibrated. This number is displayed temporarily and then
CAL is displayed.
19. Press ESC twice to return to normal operation mode.
To Next Page
Loading...
Need help?
General
