44
Model E1010 Indicator Service Manual
DATE submenu
(Set date)
Password for the Supervisor
menu is 1793.
HOUR submenu
(Set time)
Time must be entered in 24
hour (military) time.
Supervisor Menu (continued)
1. Access the Supervisor menu by pressing and holding the ESC key for 3-5
seconds…
PASS_ is displayed.
2. Key in the password, 1793, and press ENTER…
DATE is displayed. Use this to set the current date.
3. Press the PRINT key…
TYPE1 is displayed. Dates styles are listed below along with
number you enter to create that style:
1=MM/DD/YY
2=MM/DD/YYYY
3=DD/MM/YY
4=DD/MM/YYYY
4. Using the TARE and/or UNITS key, scroll to the number for the style you
want to use in all dated reports and press the ENTER key…
nn XX is displayed. nn stands for month. XX is the current value.
5. Key in the month number (1 for Jan., 2 for Feb., etc.) and press the
ENTER key…
DD XX is displayed. DD stands for day and XX represents the
current value.
6. Key in the date value and press the ENTER key…
YY XX is displayed. YY stands for year and XX represents the
current value.
7. Key in the year (04=2004, etc.) and press the ENTER key…
DATE is displayed.
1. Enter the Supervisor menu…
DATE is displayed.
2. Press the UNITS key…
HOUR is displayed. Use this item to set the time.
3. Press the PRINT key…
TYPE1 is displayed.
Type 1 is 24 hr. military format
Type 2 is 12 hour, AM/PM format
Time must be entered in 24 hour (military) time.
4. Use the TARE and/or UNITS key to scroll to the number for the style you
want to use in all time stamped reports and press the ENTER key…
HH XX is displayed. This stands for hour and its current value. See
note at left.
5. Key in the hour in military time and press the ENTER key…
nn XX is displayed. nn stands for minute and XX represents the
current value.
To Next Page
Loading...
Need help?
General
