Avery Weigh-Tronix E1010 Service Manual

28
Model E1010 Indicator Service Manual
The top line consists of the following
commands:
G<sp>GWT<sp>UN<CR><LF>
= G
= space
= Gross Weight
= space
= Unit of measure
= Carriage return
= Line feed
When this sequence is sent to a printer, the gross line of the
printout is produced.
As stated before, each application has a default print format but,
the indicator can print nine more formats that you can create
under the Serial menu, which is explained later in this manual.
Each custom format is numbered and can have a value of 1-9. See
note at left.
Print Format 0 is the default
print format reserved for each
application mode.
Formats 1-9 are available for
any application mode.
Format 10 = Format 0 for the
General weighing mode
Format 11 = Format 0 for the
ACC mode
Format 12 = Format 0 for the
Batch mode
Format 13 = Format 0 for the
Target mode
Format 14 = Format 0 for the
Count mode
Format 15 = Format 0 for the
Top mode

Avery Weigh-Tronix E1010 Specifications

General

Brand	Avery Weigh-Tronix
Model	E1010
Category	Measuring Instruments
Language	English