Avidsen V300 - F - MAINTENANCE AND UPKEEP; Maintenance Work Schedule; Operating Indicators and Error Codes

EN35
F - MAINTENANCE AND UPKEEP
1 - MAINTENANCE WORK
Maintenance work must be carried out by the
installer or a qualied individual to guarantee the
installation’s operation and safety.
The number of maintenance and upkeep
operations must be proportional to the frequency
the motorised gate is used.
For use of about 10 cycles per day, it is necessary
to provide:
• maintenance of the mechanical parts every 12
months: tightening screws, lubrication, checking
the hinges, stops and gate balance, etc.
• maintenance of the electronic parts every 6
months: engine operation, photocells, control
devices, etc.
2 - OPERATING INDICATORS
This system has two operating indicators: the
battery charge level (optional) and the history of
events.
OK
Charge batterie
PROG
OK
Code 1
PROG
– +
Code 2
Code 3
– +
Code 4
– +
OK 3s
efface historique
du plus
récent
au plus
ancien
MENU 0
(dernière
erreur)
L1 L2 L3 L4
L1 L2 L3 L4
L1 L2
L3 L4
L1 L2 L3 L4
historique des événements
L1
L2 L3 L4
OK