Avigilon ENVR2 Plus - Supported Network Configurations

Supported Network Configurations
Note: The Camera Uplink Port does not support dynamically switching DHCP servers.
Network
Connections
Camera Web
Interface
Access
Supported IP Configurations
Corporate LAN
Uplink
Camera LAN
Uplink
Notes
Corporate
LAN Uplink
only
No Static or DHCP
assigned
Unconnected
(leave as DHCP)
Camera LAN Uplink and
connected cameras will use
Zeroconf IP addresses.
Camera LAN
Uplink only
Yes Unconnected
(leave as DHCP)
Static, DHCP-
assigned, Zeroconf
Corporate and
Camera
LAN Uplink
via Camera
LAN Uplink
only
Static, DHCP-
assigned, Zeroconf
Static, DHCP-
assigned, Zeroconf
Corporate and Camera LAN
Uplinks must be on different
subnets.
Supported Network Configurations 6