Avigilon ENVR2 Plus User Manual

Configuring the ENVR2 Plus Appliance for the First Time
To... From the
Navigation
Sidebar...
On the
Card...
Setting
Change the language for
Server Management
Click Device
General
Choose your language from the drop
down Language list
Replace the default server
name with a user-friendly
hostname
Hostname
Change the Hostname
Set the time zone
Time
Specify the Time Zone and identify
the time source in the NTP drop-
down and Servers list.
For more information, see Manage Device Settings on page24.
For more information about the other configuration settings in Server Management, see Using Server
Management on page21.
If you are installing the first Avigilon appliance in your security network, you can now install the ACC Client
software on a network workstation or on the computer you are using to access Server Management. For
more information, see Installing the ACC Client on page14.
Troubleshooting
There are several ways you can discover a device that is supposed to connected to your network from a
network workstation. The recommended order to discover a device is:
l
Check that the appliance is connected to the local network with an Ethernet cable.
l
Using File Explorer (Windows) or Finder (Apple)
You are looking for a device labeled "ENVR2-PLUS-8Px-<serial number>” or the hostname you
configured in the Server Management page for this device.
Configuring the ENVR2 Plus Appliance for the First Time 12

Avigilon ENVR2 Plus Specifications

General

Brand	Avigilon
Model	ENVR2 Plus
Category	Network Hardware
Language	English