1. To format the SSD, click Reinitialize Storage.
2. When the browser displays the following error message, click OK:
This will require the ACC ES application to restart and will delete all ACC ES configuration settings
and data. Are you sure you want to continue?
The ACC Server software on the camera restarts. The camera will continue to stream video but will not record
anything until the ACC Server software has finished loading.
Changing the Communication Ports
ACC Server communicates with the ACC Client software through a range of UDP and TCP ports. The port
ranges only need to be changed if the ACC Client software is trying to access two or more instances of the
ACC Server that are behind the same NAT device (e.g. router), or if there is a port conflict.
1. In the Service Ports and RTP Ports area, you can change the Base Port that is used to access the ACC
Server.
2. Click Apply.
3. When the browser displays the following error message, click OK:
The new service base port or login limits will only take effect once Control Center Server is restarted.
Restart Control Center Server now?
The ACC Server software on the camera restarts. The camera will continue to stream video but will not record
anything until the ACC Server software has finished loading.
Overriding the Login Limit
By default, only 2 users can log in to the site at the same time. If you need extra access for users who will not
be monitoring video, you can override the recommended login limit.
1. In the Login Limit area, select the Override ACC Client Login Limit check box.
2. In the Login Limit: field, enter how many users you would like to be able to login to the camera site at
the same time.
3. Click Apply.
The new setting is saved. More than 2 users can now log in to the camera site.
Note: If more than 2 users log into the site simultaneously, be aware that this may cause degraded
camera performance depending on the camera settings.
Enabling Storage Management
You must enable Storage Management before you can archive video in the ACC Client software. The Storage
Management page allows you to enable the video archiving feature and set the network location where
archived video is saved.
Changing the Communication Ports 38
To Next Page
Loading...
Need help?
General
