15.2. Fan Settings
Control the switcher's temperature and noise by adjusting the cooling fan speed. The speed can be set
from 0% to 100% that when it is 0% the fan off, when it is 100% the fan is in AUTO mode.
In AUTO mode, the fan speed automatically adjusts based on the switcher's operating temperature. For
applications requiring silent operation, the fan can be manually turned off via the menu.
If the operating temperature reaches 57°C, a warning message will appear in orange at the bottom of the
Status/Menu page. At 60°C, the fan will automatically switch to high speed to quickly cool the CPU and
return to AUTO mode simultaneously.
15.3. ROC Correction
When the joystick needs to be calibrated, can access from the menu to celebrate the joystick for a correct
PTZ control. During the calibration there is a notice that “The joystick is being calibrated. Pease do not
touch until the calibration is complete.”
15.4. System Reset
Reset Preferences: Restore settings to default values, except for Media library, Time, Network, Language,
Fan and User Setting.
Factory Reset: Restore all settings to factory defaults.
15.5. Version
Check the switcher’s Software Version, FPGA Version, SYS Version, PCB Version, HDMI Version and
Key.
15.6. Time Settings
15.6.1. Manual Time Setting
Set Year/ Month/ Day/ Hour/ Minute directly through the Menu. Choose between 12h and 24h time
formats. The default setting is 12h.
To Next Page
Loading...
Need help?
General
