12.6. MIC
The switcher has two MIC inputs that user can connect it with a line-level or a microphone device, and
turn on/off, adjust the audio volume and delay level.
12.7. Earphone
The switcher provides an earphone output for monitoring individual audio sources. User can select an
audio source for the Earphone from Master audio, 4 SDI and 2 HDMI embedded audios, or 2 MIC audios.
Users can turn on/off the Earphone or adjust audio volume.
13. STREAM & RECORD
13.1. Streaming
The switcher supports two live streaming methods: USB output and Ethernet port output. Users can
choose the desired stream mode in the stream settings.
The USB Type-C port enables video capture to a computer and live streaming through software like OBS
or PotPlayer. The LAN port facilitates direct live streaming to platforms using an IP address. The
maximum bitrate for streaming is 32Mbps. It can live stream to 3 platform at the same time.
Network Push Streaming:
Step 1: Adjust the Bitrate, Rate Control, Encoding, Resolution, and FPS of the live video in the video
settings according to network conditions. For instance, if the network speed is slow, switch the Bitrate
Control from CBR to VBR and adjust the Bitrate accordingly. These settings can also be modified through
the web page.
To Next Page
Loading...
