Avnet SMARC MSC SM2S-IMX8MINI

To Next Page

To Previous Page

MSC SM2S-IMX8MINI 15 / 87

User Manual

The SPI interface(s) are used to implement the optional CAN interface(s) and so are mutually exclusive options. If two CAN controllers are used then the

two SPI buses are not available.

Main Page

Default Chapter4
- Table of Contents4
1 Introduction11
2 Thermal Specifications21
- Thermal Definitions21
3 Module Connector Pinout23
4 Module Connector Signal Description27
5 Functions on Module47
6 Bus and Address Mapping56
- I²C Devices56
- SPI Devices57
7 Board Support Package (Bsp)58
8 Troubleshooting87
- Known Issues and Limitations87
  - Issue 1. SPI Interfaces Not Available on MSC SM2S-IMX8MINIQC-14N0261I Variant both CAN Transceivers Drive SPI[0:1]_DIN Signals Low Even Though Not Selected by Chip Select Signal87
- Support87

Avnet SMARC MSC SM2S-IMX8MINI - Page 15

Table of Contents

Related product manuals