Revision Date: 1/17/2020
3. KEYPAD
You can use the keypad instead of the remote control unit to operate the on-screen display (OSD)
controls. The keypad operates as follows:
LED light of inductive keys
Blue: light on for 5 seconds when the keys are pressed
Power key breathing light: display go to sleep at digital mode (Digital, RS232, Ethernet)
POWER
Press the button to turn on/off the monitor screen.
Home
Press the button to select the home source.
Home source is selectable on the OSD menu. For more information about selecting a home source input,
refer to Display Settings – Home Source.
SOURCE
Press the button to select a media source.
Press and hold the button to go through the input sources.
WPS
Press the button to select WPS input.
VOLUME DOWN / UP
Press these two buttons to lower or increase the volume.
Press and hold the button to continuously lower or increase the volume.