Revision Date: 1/17/2020
Installation
Don't install in a high-temperature environment.
If the display is used in high-temperature or in direct sunlight, it may cause the case or other parts to
become distorted or damaged, resulting in overheating or electrical shock.
Don't install in a high-humidity environment.
This may cause overheating or electrical shock.
Don't install near any heat sources such as radiators, heat registers, stoves, or other apparatus that
produce heat.
This may cause fire or electrical shock.
Don't overload outlets or cables beyond electrical capacity.
Don't use extension cords as it may cause fire or electrical shock.
Don't insert the power plug into an outlet other than 100~240V AC.
This may cause fire or electrical shock.
◆
Don’t use a damaged power plug or worn outlet.
◆
Don’t insert an improper power plug it may cause fire or electric shock.
Don't place the display on an unstable shelf or surface.
The display may fall, causing injury. Please install on a horizontal, stable, level surface.
Don't place objects on the display.
◆
If the display is covered or the vents are blocked, the display could overheat and cause a fire.
◆
If metal or liquid gets into the display, it may cause fire or electrical shock.
◆
Do not put heavy objects on the display as they may fall, causing injury.
◆
Please keep a 10 cm minimum distance between the display and the wall for sufficient
ventilation.
Don't move the display when it is connected to the power cord and AV cables.
◆
When moving the display, make sure to remove the power plug and cables from the outlet or
source.
◆
When unpacking or carrying the display, at least 2 people are needed. Make sure the display
is carried upright.
◆
Transport the display upright. Avoid placing the display face up or down.
◆
Handle the display gently. Do not drop.
To Next Page
Loading...
Need help?
General
