AVOCOR F Series User Manual

Revision Date: 1/17/2020
43
Advanced Settings
This menu is used to make advanced settings.
Smart Light Control
Enable dynamic contrast (DCR) or ambient light sensor
Options: Off, DCR, By Time; Default: Off
IRFM
Create slight frame motion to help avoid image retention
Options: On, Off; Default: Off
Noise Reduction
Reduce random noise in the video content
Options: Off, Low, Medium, High; Default: Off
Wake Up From Sleep
Options: VGA Only / Digital, RS232, Ethernet, VGA / Never Sleep
Default: VGA Only
Note: VGA Only option is only available when OPS Power State sets to “Follows
Display”.
EDID Switch
Select EDID (Extended Display Identification Data) of the HDMI 1~4, OPS, and
WPS inputs. Options: 1080p, 4K2K@30, 4K2K@60; Default: 4K2K@60
Note: Use the 1080p setting for the broadest support of lower resolution sources.
Use 4K2K setting to support high resolution sources such as 3840x2160.
Touch Input Mapping
Select one of the touch connections or choose auto detection.
Options: Auto, WPS, HDMI3~4, OPS, Rear USB; Default: Auto
Game Mode
Select the game mode
Options: On; Off; Default: On
Network Configuration
Configures the network settings.
OPS Power State
Switch the OPS power state.
Options: Follows Display, Always on; Default: Follows Display

AVOCOR F Series Specifications

General

Brand	AVOCOR
Model	F Series
Category	Monitor
Language	English