Revision Date: 1/17/2020
Software Installation
This driver is not needed for any touch functionality, but is needed in order to perform firmware upgrade.
Automatic Driver Installation
If the automatic driver installation starts, please allow it to run until completion in order to not disrupt the
automatic process. Note that the icon may be hidden in the notification area, and that the procedure may
take several minutes.
Clicking on the pop-up ballon at this point would show
Fully expanded, the view in the Device Manager should look like this (View --> Devices by connection):
If the automatic installation fails to find the driver, or if automatic driver installation is disabled, or if there is no
Internet connection, this is what you will typically see when connecting a FlagFrog touch device.
To Next Page
Loading...
Need help?
General
