FOR INITIAL USE
13
137
SETUP WIZARD
DDNS ON
SYSTEM NAME Eagleeyes
HOST NAME MAC000E533A3D
E-MAIL
CURRENT HOST ADDRESS
MAC000E533A3D4A.ddns.eagleeyes.tw
SKIP
PREV NEXT
Enable DDNS if needed.
Note: To enable the DDNS later, please go to MENU NETWORK DDNS.
3.2 Mount Hard Disk
When this device is powered on, you’ll see the hard disk indicators are flashing in red, indicating the hard disk
are not detected by this recorder.
Right click the mouse to exit from the full screen mode. Click MENU → STORAGE to see the status of each
connected hard disks. Click one by one to mount them. When you’re prompted to clear the hard disk, choose
YES.
When the hard disk is mounted, the status will be changed from MOUNTING to READY.
STORAGE
HDD NEARLY FULL (GB) 5
HDD OVERHEAT ALERT (°C) 70
OVERWRITE ON
KEEP DATA LIMIT(DAYS) OFF
TEMPERATURE TO ENABLE FAN 30
REMINDER WHEN FORMATTING HDD OFF
ID TYPE STATUS
SIZE TEMP.
SERIAL NUMBER FREE SIZE FORMAT TIME HEALTH STATUS
HDD 5-1 NORMAL INACTIVE 750GB -- WD-WCAV53797317 269.856GB 2017/07/18 23:03:52 GOOD
HDD 5-2 NORMAL INACTIVE 1.00TB -- WD-WMC1U5344933 9.88GB 2017/07/18 23:10:55 GOOD
3.3 Change User Name and Password
It’s highly recommended to change the user name and password of this device to keep your account safe.
Otherwise, any person could access this device if he knows the default user name and password.
If you didn’t go through the setting wizard at the first place, you’ll be prompted to change the user name and
password:
WARNING
PLEASE BE ADVISED TO MODIFY THE DEFAULT
ACCOUNT TO ENSURE YOUR INFORMATION SECUIRTY.
MODIFY
O REMIND ME LATER
O DON’T REMIND ME ANYMORE
CONFIRM
Choose MODIFY to start the change immediately.
To Next Page
Loading...
Need help?
General
