MAIN MENU
58
587
Step3: Repeat Step2 as many as needed until all cameras which need firmware upgrade are selected.
If one firmware file applies to several IP cameras, select COPY TO to apply the same file to the
applicable cameras.
Step4: Choose UPGRADE to start upgrading all selected cameras, or choose to upgrade the camera one by
one.
6.12.3 ALERT
ALERT
EXT. ALERT OFF
INT. BUZZER ON
KEY BUZZER ON
VLOSS BUZZER ON
MOTION BUZZER ON
ALARM BUZZER ON
HDD BUZZER ON
ALARM BUZZER DURATION (SEC) 10
1) EXT. ALERT
Select to enable or disable the sound when any external alarm is triggered (ON / OFF).
2) INT. BUZZER
Select to enable or disable the sound (ON / OFF) for all internal buzzers: KEY BUZZER, VLOSS
BUZZER, MOTION BUZZER, ALARM BUZZER, and HDD BUZZER.
Note: When this item is set to OFF, item 3) to item 7) will be disabled even though they are set to ON.
3) KEY BUZZER
Select to enable or disable the sound when pressing the buttons on the front panel (ON / OFF).
4) VLOSS BUZZER
Select to enable or disable the sound when video loss happened (ON / OFF).
5) MOTION BUZZER
Select to enable or disable the sound when any motion alarm is triggered (ON / OFF).
6) ALARM BUZZER
Select to enable or disable the sound when any internal alarm is triggered (ON / OFF).
7) HDD BUZZER
Select to enable or disable the sound (ON / OFF) when the HDD remaining capacity reaches to the value
set in HDD NEARLY FULL (GB).
8) ALARM BUZZER DURATION (SEC)
Select the duration time for alarm buzzer in second (5 / 10 / 20 / 40).
6.12.4 EVENT LOG
You can check all the event information (event type, time and channel), or clear all log records.
EVENT LOG
EVENT TIME COMMENT
KEY UNLOCK 2011/NOV/19 15:49:07
VIDEO LOSS 2011/NOV/19 15:32:05 04
POWER ON 2011/NOV/19 15:32:02
PREV NEXT CLEAN
To Next Page
Loading...
Need help?
General
