MAIN MENU
57
577
6) RESET ALL GUARD CONNECTION (For selected models only)
When there’re more than 2 users who have the authority to enable Push Video on their mobile devices and
configure its related settings, it might be confusing to know whose command is working. In this case, use this
function could force the camera to discard all Push Video setup and reconfigure it.
6.12.2 UPGRADE
In this menu, you can choose to upgrade your recorder (LOCAL) or the connected our brand’s IP cameras
(CAMERA).
LOCAL
Save the upgrade files obtained from your installer or distributor in a compatible USB flash drive, and insert it
into the USB port. Then, click SUBMIT to start upgrading.
Note: Before using the USB flash drive, please use your PC to format the USB flash drive to FAT32
format first. For the list of compatible USB flash drives, please refer to “APPENDIX 3 COMPATIBLE
USB FLASH DRIVE LIS at page 75.
UPGRADE
LOCAL CAMERA
UPGRADE SUBMIT
VERSION 1002-1001-1001-1000
CAMERA
You can choose to upgrade several connected IP cameras from the recorder as long as the cameras are our
brand’s IP cameras.
UPGRADE
LOCAL CAMERA
CHANNEL VERSION DIRECTORY STATUS
CH1 1085-1032-1046-1020-A1A1 /mnt/usb/FullImg-1086-1033-1046-1020.bin
CH2 1020S-1007S-1011S-1009S
CH3
CH4
UPGRADE COPY TO
Step1: Save the upgrade files obtained from your installer or distributor in a compatible USB flash drive, and
insert it into the USB port.
Step2: Choose to browse to where the firmware file is saved and choose the file to upgrade. Then, choose
SELECT to confirm and return to the upgrade page.
/ USB DEVICE
NAME SIZE TYPE MODIFIED DATE
FullImg-1086-1033-1046-1020.bin 27.6MB regular file
2017-07-13 12:19:32
FullImg-1022-1007-1011-1009.bin 9.6MB regular file
2017-08-16 17:05:16
CANCEL SELECT
To Next Page
Loading...
Need help?
General
