MAIN MENU
49
497
6.8.4 EaZy
This function is used to connect this recorder to Internet by using EaZy Networking. For details, please refer to
“APPENDIX 7 EAZY NETWORKIN” at page 79.
EaZy
ENABLE EAZY NETWORKING ON
MAC: 000e53eca7b4
UUID: E736DCBF-D4BB-4CA8-86FD-62658E2ECEC1
PORT: 80
EAZY NETWORKING OFFLINE
6.9 TIME
TIME SETUP
DATE 2009 / NOV / 17
TIME 15 : 35 : 53
FORMAT Y/M/D
NTP SERVER Pool.ntp.org
SYNC PERIOD DAILY
GMT (UTC+08:00)TAIPEI
CLIENT TIME SYNC VIA RECORDER OFF
SYNC NTP SERVER TIME SUBMIT
1) DATE
Set the current date. The default display format is YEAR – MONTH – DATE (Y-M-D).
2) TIME
Set the current time in HOUR : MIN : SEC.
3) FORMAT
Set the time display format: Y/M/D, M/D/Y or D/M/Y.
4) NTP SERVER
Click to change the default NTP server to another server they’re familiar with, or keep the default NTP server.
5) SYNC PERIOD
Select to synchronize the device time every day (DAILY), or turn this function off (OFF).
6) GMT
Select your time zone.
7) CLIENT TIME SYNC VIA RECORDER
Enable this function to synchronize the time of the connected IP cameras via the recorder when the recorder
is connected to the Internet. This could ensure the time of the recorder and IP cameras are the same to
prevent the confusion of time inconsistency.
Note: You may receive NTP-based DDoS attacks when this function is enabled. Please make sure your
network is secured to prevent this kind of attack.
8) SYNC NTP SERVER
Chose SUBMIT to synchronize the recorder’s time with the NTP server pre-defined in NTP SERVER.
Note: This function requires internet connection. Please make sure your recorder is connected to the
internet.
To Next Page
Loading...
Need help?
General
