7
BEFOREUSE
1.Chooseunitinstallationlocation carefully.Avoidplacingit indirectsunlight
or close to a source of heat. Also avoid locations subject to vibrations and
excessive dust, cold or moisture. Keep away from sources that hum, such as
transformersormotors.
2. Do not open the cabinet as this might res
ult in damage to the circuitry or
electricalshock.Ifaforeignobjectshouldgetintotheset,contactyourdealer.
3.Besurenottohandlediscsandrecordswithdirtyfingers.Neverinsertadisc
orarecordthathasacrackonthesurface.
4.Whenremoving
thepowerplugfr
omthewalloutlet,alwayspulldirectlyon
theplug,neverpullthecord.
5.Tokeepthelaserpickupclean,donottouchit,anddonotforgettoclosethe
disctray.
6.Donotattempttocleantheunitwithchemicalsolventsasthismightdamag
e
thefinish.Useaclean,drycloth.
7.Inordertoshutoffthepowertothisproductcompletely,unplugthepower
cordfromthewalloutlet.Besuretounplugtheunitifyoudonotintendtouse
itforanextendedperiodoftime,suchaswhileonva
cation.
8.Keepthismanualinasafeplaceforfuturereference.
BEWAREOFCONDENSATION
Whentheunitismovedfromacoldorwarmplace,orisusedafterasudden
temperaturechange,thereisadangerofcondensation.Watervaporintheair
couldcondenseonthemechanism.Topreventthis,ifyouaregoingtousethe
unitinaconditionwherecondensationco
uldoccur,youshouldleavetheunit
for1or2hoursafterpluggingitintoanACoutletdependingontheamountof
condensation. If this is done, the unit will stabilize at the temperature of its
surroundings.