10
AXIS 231D - Installing the AXIS 231D
Installing on a Network
The AXIS 231D is designed for installation on an Ethernet network. This involves
assigning an IP address to the dome camera, either manually or via an automated network
service (DHCP). Select one of the following procedures depending on your network:
Notes:
•The AXIS 231D has a default IP address - 192.168.0.90
•DHCP is enabled by default
•The AXIS 231D supports Universal Plug and Play (UPnP) in Windows Me and XP. UPnP is enabled by default.
Note that UPnP must be installed on your workstation. To do this, open the Control Panel from the Start Menu
and select Add/Remove Programs. Select Add/Remove Windows Components and open the Networking Services
section. Click Details and then select UPnP as the service to add. Refer to the Windows help files for more
information.
AXIS Media Control (AMC)
AXIS Media Control (AMC) - an ActiveX component required for Microsoft Internet
Explorer, installed automatically on first use.
AMC must be installed for viewing live images in Microsoft Internet Explorer. If your
working environment restricts additional software components, you can configure your
AXIS 213 to use a Java applet for updating the images. See the online help files under Live
View Config | Layout | Default Viewer for Internet Explorer. Or use another supported
Web browser.
Available procedures:
English
on page:
German
on page:
French
on page:
Spanish
on page:
Italian
on page:
Manual Installation using AXIS IP Utility (Windows) page 11 page 52 page 60 page 68 page 76
Manual Installation using ARP and Ping in Windows page 12 page 53 page 61 page 69 page 77
Manual Installation using ARP and Ping in UNIX/Linux page 13 page 54 page 62 page 70 page 78
AXIS Internet Dynamic DNS Service page 14 page 55 page 63 page 71 page 79
To Next Page
Loading...
Need help?
General
