35
AXIS 231D - System Options
2. Click OK.
3. Create self-signed certificate generates and installs a certificate which will be
displayed under Installed Certificate.
Create Certificate Request generates a PEM formatted request which you copy and
send to a CA for signing. When the signed certificate is returned, click Install signed
certificate... to install the certificate in the AXIS 231D.
4. Set the HTTPS Connection Policy for the administrator, Operator and Viewer to
enable HTTPS connection (set to HTTP by default)
Please refer to the home page of your preferred CA for information on where to send the
request etc. For more information, please refer to the online help files
Date & Time
Current Server Time - displays the current date and time (24h clock). If this has not been
configured, the time displayed is the default setting. The time can be displayed in 12h clock
format in the Overlay Images (see below).
New Server Time - Select your time zone from the drop-down list and check the daylight
saving time changes, if desired.
From the Time Mode section, select the preferred method to use for setting the time:
Date & Time Format Used in Images - specify the formats for the date and time (12h or
24h) displayed in the Live View video streams.
Use the predefined formats or use your own custom date and time formats. See Advanced
File Naming & Date/Time Formats in the help files
for information on how to create
your own file formats.
Network - TCP/IP Settings
IP Address Configuration - the IP address of the Network Dome Camera can be set
automatically via DHCP, or a fixed IP address can be set manually. A host name can be
used and there are options for setting up notification of changes in the IP address. DHCP is
enabled by default.
• Synchronize with computer time - sets the time from the clock on your
computer.
• Synchronize with NTP Server - the Network Dome Camera will obtain the
time from an NTP server every 60 minutes. Specify the NTP server's IP
address or host name. Note that if using a host name for the NTP server, a
DNS server must be configured under TCP/IP settings. See Network | TCP/IP
below.
• Set manually - this option allows you to manually set the time and date.
To Next Page
Loading...
Need help?
General
