12 USER MANUAL
_________________________________________________________________________________________________________________
10. Start-up
Leave the pan empty and plug the feeder to the mains 230V. At the end of self-
tests, the balance displays zero indication and is now ready to work
Sequence of action after turn switch on:
Display test
Electronics components test
Program version
Zeroing.
Ready to work.
Moisture in the air may condense on the surface of the balance when
transferred to the warmer environment. In this case leave the balance
for at least 4 hours unplugged from the mains for conditioning to avoid
wrong operating or damage of the balance.
To Next Page
Loading...
Need help?
General
