Axis AD Series - Paperweight Calculation (Paper)

44 USER MANUAL
__________________________________________________________________________________________________________________
14.21 Paperweight calculation (PAPEr)
This function enables to calculate paperweight of 1m
2
of paper basing on samples
of known area. For quick access, the function is accessible directly by pressing
 key.
The balance must be tared just
before the measurement.
Place the specific sample quantity
of the same area (possible values: 1,
2, 5, 10, 20, 50, 100).
Press MENU key to access Function
Menu. To enter the function press
 T  key when “PAPEr” is
displayed.
PCS is the number of samples
placed on the pan. To choose
previously used value, select old
option.
"ArEA" is the area of a single
sample. It is possible to choose
standard values (0,02 or 0,1g/m
2
) or
enter specific value (“A” option).
To enter the value use the following
keys:
- digit increase,
- decimal point,
T - next digit,
MENU - end.
The result of paperweight
measurement is finished with “=”
mark pointing g/m
2
unit.
The balance is ready for the next
measurements.
 key causes passage to mass measurement and enables next samples (with
other quantity and surface of a single sample) measurement start.
13.3
g/m=
2
0.000 g
5
1.338 g
PAPEr
PCS
n=5
P=0.02
ArEA
MENU
T
T
T
T
T
T