Axis AD Series - 14.8 Percentage weighing (PErCEnt)

USER MANUAL 25
___________________________________________________________________________________________________________________
14.8 Percentage weighing (PErCEnt)
This function enables to display
weighing result as a percentage of
a reference sample.
A measurement is performed in two
phases:
- first phase – weighing a reference
sample,
- second phase – measuring specific
sample as a percentage of
the reference sample.
Weighing result is displayed in
different format, depending on the
reference sample weight value. For
values of 0÷3,5% of weighing range
the format is “100.0”, for values
3,5÷35% it is “100.00” and
35÷100% - “100.00”
The function has the following
options:
- PEr oFF – disables the function,
- PEr on – stores current indication
as 100% and activates percentage
weighing,
Note:
Err-3 communicate signalises that a
sample was not put on a pan. The
same communicate appears if 100%
piece weight is less than 0,5*Min of
scale
When the function is activated ->T<- key function does not change.
0.00 g
19.07 g
PErCEnt
PEr oFF
PEr on
100.00%
50.00%
100%
50%
MENU
T
T