USER MANUAL 27
___________________________________________________________________________________________________________________
14.10 Tare memorizing function (tArE)
This function enables to measure gross weight of a sample placed in a container
of a known weigh value (stored in the memory) and to display calculated net
weight of the sample. Tare value is recalled from the memory with
T
(or
0
when pan is unloaded). Tare value may be entered using the keypad or by
sampling container weight from the pan.
Inserting tare value using keypad:
After pressing MENU key and
choosing tArE function using
T
key ,functions below are
displayed:
- tAr OFF – function off,
- tAr on – function on with tare
inscribed earlier,
- PAn – actual mass on pan setting
as tare,
- VALUE – inscribing tare using:
, ,
T
i MENU.
Choose tare inscribing function
using
T
key.
After inscribing scale works with
new tare value. The scale will show
nett mass (the actual object mass
minus tare value).
Each using of
T
key (or
0
,
when the pan is unloaded) will
cause zeroing, and deleting
memorized tare value (user will see
minus indication) .
ATTENTION:
Tare value is also memorized after
the scale is turned off.
0.00g
0.00g
tArE
50.00g
VALUE
-20.00g
T
T
2
2 -
20
MENU
T
To Next Page
Loading...
