USER MANUAL 31
___________________________________________________________________________________________________________________
14.14 Function for weighing animals (LOC)
The function allows weighing animal moving on the scale.
Press MENU key.
When LOC is displayed press
T
key.
The following options appear on
display successively:
- LOC oFF – out of function,
- LOC on –automatic measurement
after loading the scale,
- LOC Prn – measurement initiated by
pressing key.
When LOC on is displayed press
T
key.
Tare the scale using
T
key if
necessary and place the animal on the
pan.
Wait until the weighing result is
averaged – scale display will be
blinking. Then scale will show stable
averaged result and will send it
through serial port. Final result is
displayed on the display and send via
serial port to computer or printer.
The result remains on display for
about 30 second.
Important notes:
1. The loads less than Min are not averaged.
2. In the case when placing the animal takes more than 5s, it is advised to use
LOC-2 option (measurement initiated manually). It will allow performing
measurement in right moment pressing key.
0.00g
LOC
LOC oFF
LOC on
25.00g
25.00g
PrInt
MENU
T
T
To Next Page
Loading...
Need help?
General
