Axis AD Series User Manual

USER MANUAL 41
___________________________________________________________________________________________________________________
14.19.2 Liquid density determination
This function determines liquid
density basing on plunger weight in
air and in examined liquid with
known volume, using the formula
below:
where
m
1
– plunger weight in air
m
2
– plunger weigh in a liquid
V – plunger volume
Plunger volume is stored on its
hanger.
To enter the value use the following
keys:
- digit increase,
- decimal point,
T - next digit,
MENU - end.
Phase I: measurement in air.
Phase II: measurement in liquid.
To print measurement result and
begin next measurement press
key.
V
mm
21

 
MENU
MENU
T
T
T
T
0.000g
LIquId
PLunG
5.51
LOAD_H
LOAD_L
22.001g
11.500g
hYdro
hYd on
-
-

Axis AD Series Specifications

General

Brand	Axis
Model	AD Series
Category	Scales
Language	English