Axis AD Series - 14.4 Serial port working mode selection (SendInG)

20 USER MANUAL
__________________________________________________________________________________________________________________
14.4 Serial port working mode selection (SendInG)
The function enables to set the
serial port working mode.
- StAb – transmission after using
key and indication stabilization,
- no – StAb – transmission after using
key without stabilization,
- Auto – after putting and taking off
the weighed object without using
,
- Cont. – about 10 results per second.
Auto mode is suggested when
working with printer.
0.00g
SEndInG
Auto
Stb
0.00g
MENU
T
T