Axis AD Series - Page 3

USER MANUAL 3
_________________________________________________________________________________________________________________
1. Introduction
AD series balances are destined for laboratory weighing where high accuracy is
required.
All balances are metrologically tested - calibration or legal verification
certificate on demand.
Legal verification is required for balances used in some applications: direct
trade, pharmaceutical prescriptions, medical and pharmaceutical analysis, goods
packing and others.
Balances with legal verification are marked with the following:
- protective seal placed on the casing mounting screw,
- notified body stamps and green M sticker placed on balance name plate.
Legal verification is valid for 3 years (until verification seals are not broken).
As weight indication depends on gravitational acceleration in a place of the
installation, the manufacturer adjusts balance indication for specific gravity zone
basing on delivery address. Gravity zone is specified with gravitational
acceleration range given on a sticker placed at the back of a balance.
In case installation place is changed or balance indications are not accurate, it is
advised to contact a nearest service in order to re-adjust the balance.
NACE classification: 33.20.31.
Certificates:
EC Type-Approval Certificate Producer Certificate
No. PL 04 030 EN ISO 9001:2000
No. 78 100 6386